Rear Shock Vacuum Bleeder

So after learning how to go over the forks I plan on doing my own shock maintenance in the future also.

And to do it right a vacuum bleeder is the way to go.

Decided to build my own, had I found this solution before ordering parts I would probably gone that route.

Had already . . . → Read More: Rear Shock Vacuum Bleeder

WP Inner fork tube and rebound valve

How to get the inner tube out is covered in the post I did about replacing the fork seals.

Have later found an easier way to get to rebound tap, that wont require breaking inner leg apart

So had just gotten the forks back together but there was some issues with the rebound adjuster so . . . → Read More: WP Inner fork tube and rebound valve

KTM 950 Adventure Fork Seal Replacement

Tried a few times to use a feeler gauge and clean the seal and it work for a little while before oil started seeping out again. Have a spare set of fork legs so just swapped to them.

So they have been standing for some time in the garage and leaked just standing there.

Cleaned . . . → Read More: KTM 950 Adventure Fork Seal Replacement